湖北国迈洛克流体设备有限公司
固定电话：027-86576122
邮箱：GUOMAILOK@163.com
联系电话：13818890435叶经理
公司地址：武汉市青山区环保科技产业园百超钢材加工配送基地18楼08号厂房
|
·最高工作压力20.6 MPa。
·固定开启压力均在0.2MPa以下（多种弹簧，可选择开启压力）。
·额定温度204℃（仅用于氟橡胶配置）。
·正向流动压力损失小，反向截止密封性好，启闭灵敏，工作时无振动和噪声。
·标准配置为氟橡胶。可选丁腈橡胶、三元乙丙橡胶、全氟橡胶。
·连接方式：内外螺纹连接，卡套连接。
产品结构图
产品尺寸图：
公制：
型号 | 通径 | Cv | 连接形式 | 尺寸(mm) | ||||
(mm) | 进气 | 出气 | A | B | C (Hex Flat) | D (Hex Flat) | ||
SS-CV11-TF6M | 4.8 | 0.47 | 6 mm GM-LOK | 60.5 | 25.0 | 14.0 | 15.9 | |
SS-CV12-TF10M | 7.1 | 1.48 | 10 mm GM-LOK | 64.0 | 24.9 | 19.0 | 17.5 | |
SS-CV13-TF12M | 9.9 | 1.70 | 12 mm GM-LOK | 77.0 | 32.8 | 22.0 | 23.8 | |
型号 | 通径 | Cv | 连接形式 | 尺寸(in.) | ||||
(in.) | 进气 | 出气 | A | B | C (Hex Flat) | D (Hex Flat) | ||
SS-CV11-TF2 | 0.19 | 0.16 | 1/8" GM-LOK | 2.19 | 0.98 | 7/16 | 5/8 | |
SS-CV11-NT2 | 0.47 | 1/8" Male NPT | 1.75 | - | ||||
SS-CV11-FNT2 | 1/8" Female NPT | 1.84 | - | - | ||||
SS-CV11-TF4 | 1/4" GM-LOK | 2.36 | 0.98 | 9/16 | ||||
SS-CV11-NT4-TF4 | 1/4" Male NPT | 1/4" GMLOK | 2.22 | |||||
SS-CV11-NT4 | 1/4" Male NPT | 2.1 | - | |||||
SS-CV12-FNT4 | 0.28 | 1.48 | 1/4" Female NPT | 2.24 | - | - | 3/4 | |
SS-CV12-TF6 | 3/8" GM-LOK | 2.58 | - | 11/16 | ||||
SS-CV12-NT6 | 3/8" Male NPT | 2.19 | 1.07 | - | ||||
SS-CV13-FNT6 | 0.39 | 1.70 | 3/8" Female NPT | 2.51 | - | - | 7/8 | |
SS-CV13-TF8 | 1/2"GM-LOK | 3.16 | - | 7/8 | ||||
SS-CV13-NT8 | 1/2" Male NPT | 1.43 | - | |||||
SS-CV14-FNT8 | 0.53 | 2.60 | 1/2" Female NPT | 3.33 | - | - | 1-1/8 | |
SS-CV14-TF10 | 5/8" GM-LOK | 3.61 | 1.89 | 1 | ||||
SS-CV15-TF12 | 0.63 | 5.20 | 3/4" GM-LOK | 4.36 | 2.64 | 1-1/8 | 1-1/4 | |
SS-CV15-NT12 | 3/4" Male NPT | 4.15 | - | |||||
SS-CV15-FNT12 | 3/4" Female NPT | 4.06 | - | - | ||||
SS-CV16-TF16 | 0.71 | 9.00 | 1" GM-LOK | 4.77 | 2.69 | 1-1/2 | 1-3/8 | |
SS-CV16-NT16 | 1" Male NPT | - | ||||||
SS-CV16-FNT16 | 1" Female NPT | - | 1-5/8 | |||||
EX: | SS | CV11 | NT4 | TF4 | R | 1 |
母体材料： | 系列号: | 进气连接: | 出气连接: | 密封材料: | 开启压力值: | |
| SS: 316 | CV11, CV12, | NT4:1/4”MaleNPT | TF4:1/4”GM-LOK | R: 氟橡胶 | 1: 1 psi (0.07bar) |
CV13, CV14, | ...... | ...... | B: 丁晴橡胶 | 3: 3 psi (0.21bar) | ||
CV15, CV16 | 详见上表 | 详见上表 | Y: 乙丙橡胶 | 10: 10 psi (0.7bar) | ||
|
|
| N: 氯丁橡胶 | 25:25psi(1.72bar) | ||
|
|
| Q: Kalrez® |
|
